We are aware of a potentially service impacting issue. Learn more

How To Use Traceroute and MTR to Diagnose Network Issues Print

  • 102

Introduction

An important part of administering servers is monitoring network connectivity.

There are a few tools that are simple to use, but valuable to know. In this guide, we will discuss how to use a tool called traceroute to diagnose where a network issue may be happening.

We will also look at a utility called mtr which combines much of the functionality of ping and traceroute into one interface.

 

How To Use Traceroute

Traceroute is a simple tool to show the pathway to a remote server. This can be anything from a website that you are attempting to visit, to a printer on your local network.

The traceroute program is installed by default on just about every Linux distribution, so you shouldn't need to install it.

To call it, we simply need to provide a website or IP address that we would like to explore:

traceroute google.com (tracert google.com for CMD)

Tracing route to google.com [216.58.223.46]
over a maximum of 30 hops:

  1    

How To Read Traceroute's Output

The first line tells us the conditions that traceroute is operating under:

traceroute to google.com (173.194.38.137), 30 hops max, 60 byte packets

It gives the specified host, the IP address that DNS returns for that domain, the maximum number of hops to check, and the size of the packet that will be used.

The maximum number of hops can be adjusted with the -m flag. If the host you are trying to route to is over 30 hops away, you may need to specify a larger value here. The maximum value you can set is 255.

traceroute -m 255 obiwan.scrye.net

You can adjust the size of the packet that is sent to each hop by giving the integer after the hostname:

traceroute google.com 70
traceroute to google.com (173.194.38.128), 30 hops max, 70 byte packets
 1  192.241.160.254 (192.241.160.254)  0.364 ms  0.330 ms  0.319 ms
 2  192.241.164.237 (192.241.164.237)  0.284 ms  0.343 ms  0.321 ms
 

After the first line, each subsequent line represents a "hop", or intermediate host that your traffic must pass through to reach the computer represented by the host you specified.

Each line has the following format:

hop_number   host_name   (IP_address)  packet_round_trip_times

Here is an example of a hop you might see:

3  nyk-b6-link.telia.net (62.115.35.101)  0.311 ms  0.302 ms  0.293 ms

Here is what each field means:

  • hop_number: A sequential count of the number of degrees of separation the host is from your computer. Traffic from hosts with higher numbers have to go through more computers to get routed.

  • host_name: This field contains the result of a reverse DNS lookup on the host's IP address, if available. If no information is returned from the reverse DNS query, the IP address itself is given.

  • IP_address: This field contains the IP address for this network hop.

  • packetroundtrip_times: The remainder of the line gives the round-trip times for a packet to the host and back again. By default, three packets are sent to each host and each attempt is appended to the end of the line.

    • If you would like to change the number of packets that are tested against each host, you can specify a number with the -q option, like this:

      traceroute -q1 google.com
      

If you would like to forgo the reverse DNS lookup to speed up the trace, you can pass the -n flag:

traceroute -n google.com
traceroute to google.com (74.125.235.7), 30 hops max, 60 byte packets
 1  192.241.160.253  0.626 ms  0.598 ms  0.588 ms
 2  192.241.164.241  2.821 ms  2.743 ms  2.819 ms
 3  69.31.95.133  1.470 ms  1.473 ms  1.525 ms

If your traceroute dissolves into some asterisks (*), there is a problem with the route to the host.

    15  209.85.248.220 (209.85.248.220)  121.809 ms 72.14.239.12 (72.14.239.12)  76.941 ms 209.85.248.220 (209.85.248.220)  78.946 ms
16  72.14.239.247 (72.14.239.247)  101.001 ms  92.478 ms  92.448 ms
17  * * 209.85.250.124 (209.85.250.124)  175.083 ms
18  * * *
19  * * *

What Does a Route Issue Mean?

If your traceroute attempt stops at a particular hop or node and cannot find a route to the host, you have a problem.

While the hop where the route fails to return may be the location of the networking issue, it isn't always that easy to diagnose.

Due to the fact that each ping represents a round-trip packet, and the situation where packets often use different pathways in either direction, it may indicate a problem in a completely different, possibly closer route.

It also may be the case that the problem is with the hop directly after the last hop you see. It is difficult to diagnose the exact location of the problem unless you can get a return traceroute from that specific hop. This is usually not possible outside of your own network.

 

How To Use MTR

A dynamic alternative to the traceroute program is mtr. Combining the functionality of ping and traceroute, mtr allows you to constantly poll a remote server and see how the latency and performance changes over time.

Unlike traceroute, mtr is not installed by default on most systems. You can get it by typing the following commands.

Ubuntu/Debian:

sudo apt-get install mtr

CentOS/Fedora:

yum install mtr

Arch:

pacman -S mtr

Once it is installed, you can call it by typing:

mtr google.com
                       My traceroute  [v0.80]
traceroute (0.0.0.0)                        Tue Oct 22 20:39:42 2013
Resolver: Received error response 2. (server failure)er of fields   q
uit                         Packets               Pings
 Host                     Loss%   Snt   Last   Avg  Best  Wrst StDev
 1. 192.241.160.253        0.0%   371    0.4   0.6   0.1  14.3   1.0
 2. 192.241.164.241        0.0%   371    7.4   2.5   0.1  37.5   4.8
 3. xe-3-0-6.ar2.nyc3.us.  2.7%   371    3.6   2.6   1.1   5.5   1.1
 4. sl-gw50-nyc-.sprintli  0.0%   371    0.7   5.0   0.1  82.3  13.1

While the output may look similar, the big advantage over traceroute is that the output is constantly updated. This allows you to accumulate trends and averages, and also allows you to see how the network performance varies over time.

If you ran a traceroute, there is a possibility that the packets that were sent to each hop happened to make the trip without incident, even in a situation where the route is suffering from intermittent packet loss. The mtr utility allows you to monitor for this situation by gathering data over a wider range of time.

It is also possible to run mtr with the --report option, which returns the results of sending 10 packets to each hop.

mtr --report google.com
HOST: traceroute                  Loss%   Snt   Last   Avg  Best  Wrst StDev
  1.|-- 192.241.160.254            0.0%    10    1.5   0.9   0.4   1.5   0.4
  2.|-- 192.241.164.237            0.0%    10    0.6   0.9   0.4   2.7   0.7
  3.|-- nyk-b6-link.telia.net      0.0%    10    0.5   0.5   0.2   0.7   0.2
  4.|-- nyk-bb2-link.telia.net     0.0%    10   67.5  18.5   0.8  87.3  31.8

This can be useful when you don't necessarily want to measure in real-time, but you want a greater range of data than traceroute provides.

 

Conclusion

With traceroute and mtr, you can get a sense as to which servers on your way to a specific domain or address are causing problems. This can be useful when troubleshooting an internal network, and also when trying to provide information to support members or ISPs when you are experiencing network problems.


Was this answer helpful?

« Back